● Features: non-polluting transport, maintenance-free; may be installed in any direction; allowing media-rich vapor; 24-hour continuous operation, stable performance and high reliability. Versatile, and more for medical devices, gas analyzers, industrial instruments. ● Detailed parameters: a, type? No.: VAK5008 voltage: 12 V DC / 24 V DC load current: <0.5 A (12 V DC); <0.25 A (24 V DC) Peak Flow: 8 L / min mean flow: 5 L / min vacuum (absolute pressure): 50 kPa relative to the vacuum degree: ≈-51kPa Second, model: VAK4512 Voltage: 12 V DC / 24 V DC Load current: <0.72 A (12 V DC); <0.36 A ( 24 V DC) peak flow: 12 L / min average flow: 7 L / min vacuum (absolute pressure): 45kPa relative vacuum degree: ≈ -56 kPa ● mini-pumps Optional: 1, the selection of particular attention: ① miniature vacuum suction side can take large loads, or even completely blocked, are working properly. ② miniature vacuum pump exhaust side must be unobstructed, in the exhaust pipe without any damping elements! Otherwise, select FML or FAY or PCF series. 2, low electromagnetic interference type: If the system is equipped with precision circuitry (such as SCM) controls the operation of the micropump is recommended priority configuration brushless motor VLK series. 3, both the DC power supply when ordering please indicate voltage values, such as VAK5008-24V. Recommendation: Preferred 24V voltage product, which is more conducive to the pump to work long hours! 4, Weight: about 450 grams. 5, micro vacuum pump working medium: micro pump the extracted gas must be free of corrosion, an oil-rich but allows water vapor. This series of products according to the gas temperature can withstand medium into normal medium-and high-temperature media type. Order high temperature medium to be specifically labeled products, such as VAK5008-24V (high-temperature media type). 6, the smaller the value of the vacuum suction capacity of the stronger. 7, unless otherwise stated, at 20 ℃, standard atmospheric pressure peak flow we all referred traffic. ● mini-pumps for use: 1, micro vacuum pump working environment temperature: 0 ~ 40 ℃ (no condensation), the pump should not be in the outdoor sun, should be in a clean environment. Relative humidity: ≤ 75%. ● Note: 1, foreign body may not fall into the gas nozzle, otherwise it will damage the micro-pump! 2, the exhaust side must remain unobstructed! Otherwise it will damage the micro-pump. 3, All products are not available proof performance, can not work in explosive environments! 4, when the extraction of harmful gases, the customer must re-seal the pump to ensure personal safety! Details, see: wωw. RuIyi. ΝeТ Contact: O28-6I986875 / 6I986879 mail: I3324I6455@qQ.Сom Luotf-2013-09