● Features: 1, integrated speed control function, regulating traffic is very convenient. 2, speed control function can be selected using the built-governor or external potentiometer speed and good scalability. 3, the integrated speed indicator, according to an intuitive understanding of light is blinking frequency of the pump running. 4, the configuration brushless motor. Long life, low electromagnetic interference. 5, self-protection function. With overheating protection, overload protection. (Domestic version no) 6, maintenance-free, pollution-free transmission. Allowing media-rich vapor. ● Product Certification: EU Safety Certification: CE Electromagnetic Compatibility Certification: EMC ● Technical Parameters: I. Model: KAC562.4 voltage: 12 V DC load current: <290 mA adjustable flow range: Max: maximum peak flow: 3.5 L / min; maximum average flow rate: 2.4 L / min minimum: minimum peak flow rate: 2.4 L / min; minimum average flow rate: 1.6 L / min relative vacuum: -45 kPa Second, model: KAC463.8 voltage: 24 V DC load current: <240 mA flow adjustable range: Max: maximum peak flow rate: 5.8 L / min; maximum average flow rate: 3.8 L / min minimum: minimum peak flow rate: 3.9 L / min; minimum average flow rate: 2.5 L / min relative vacuum: -55 kPa Note: 1, flow test status parameters: Pump ductless exhaust port, exhaust port connection silicone rubber hose, inner hole diameter 4 mm, length 1000 mm (average flow measurement), 750 mm (peak flow measurements). 2, the flow rate is adjustable from using the built-governor test value 3, the input voltage requirements ± 0.5V ● Optional: 1, miniature vacuum suction side can take large loads, or even completely blocked, are normal working . 2, the pump must be unobstructed discharge end of the exhaust pipe shall not have any damping elements! Otherwise, select FML or FAY, PCF series. 3, Weight: about 280 g 4, unless otherwise specified, at 20 ℃, standard atmospheric pressure load flow we all referred traffic. ● Performance: 1, the working environment: The pump can not be in the outdoor sun, should be in a clean, airy environment. Ambient temperature: 0 ℃ ~ 40 ℃ (no condensation) Relative humidity: ≤ 90% 2, the working medium: ① the extracted gas pump must be free of corrosion, an oil-rich but allows water vapor. ② The series can withstand medium according to the gas temperature is divided into normal medium-and high-temperature media type. Not specifically stated as normal media type. Order high temperature medium to be specifically labeled products, such as KAC562.4-12V (high-temperature media type). ● Note: 1, the exhaust side must remain unobstructed, otherwise it will damage the micro-pump. 2, foreign body may not fall into the gas nozzle, otherwise it will damage the micro-pump. 3, the product does not have proof performance, can not be used in explosive environments! 4, when the extraction of harmful gases, the customer must re-seal the pump to ensure safe! Details, see: wωw. RuIyi. ΝeТ Contact: O28-6I986875 / 6I986879 mail: I3324I6455@qQ.Сom Luotf-2013-09