● Features: 1, suitable for high temperature environment can be +5 ℃ ~ +60 ℃ environment of continuous operation at full load around the clock. 2, the inlet for vacuum exhaust pump can be used; pollution transport, maintenance; can be installed in any direction. ● Technical parameters: I. Model: FXJ704.5 voltage: 12 V DC / 24 V DC load current: <450 mA (12 V DC); <260 mA (24 V DC) Peak flow rate: 4.5 L / min mean flow: 2.5 L / min (12 V DC); 2.9 L / min (24 V DC) Absolute Vacuum: 59 kPa relative to the vacuum degree: ≈ -42 kPa maximum output pressure: 70 kPa Second, model: FXJ402.5 voltage: 12 V DC / 24 V DC load current: <400 mA (12 V DC); <240 mA (24 V DC) Peak flow rate: 2.5 L / min average flow rate: 1.8 L / min Vacuum: 74 kPa relative vacuum degree: ≈ - 27kPa maximum output pressure: 40 kPa Note: All parameters are on the table in a standard atmospheric pressure, 20 ℃ time value. Unless otherwise noted, at 20 ℃, standard atmospheric pressure load flow we all referred traffic. ● Technical parameters: Maximum pressure: exhaust port when the pump is completely exposed to the atmosphere, the pump discharge port directly connected to the pressure gauge, with continued pressure pump, pressure rising, stabilizing at a a value, the value is used as the pump "maximum output pressure." ● Optional: 1, pump suction side and discharge side with a large load can even completely blocked, are working properly, the pump will not be damaged. 2 Recommendation: 24V preferred product, same price, better quality. 3, all specifications are using the DC power supply; ordering please indicate working voltage, such as, FXJ704.5-24V. 4, Weight: about 420 grams 5, for other voltages, the flow of product specifications, you can contact customization. ● Instructions for use: 1, the pump working medium: gas pumped must be non-corrosive, non-oily, non-ice and other solid foreign objects. Was pumping gas allowable temperature range: +5 ℃ ~ +100 ℃ 2, the pump working environment: the pump should not be in the outdoor sun, shall be clean and free of corrosive environment Operating temperature: +5 ℃ ~ +60 ℃ (no knot Lu) Relative humidity: ≤ 75% 3, pump storage environment: The pump must be stored in clean, dry non-corrosive environment Storage temperature: 0 ℃ ~ +60 ℃ (no condensation) Storage Relative Humidity: ≤ 75% ● Note: 1, foreign body may not fall into the gas nozzle, otherwise it will damage the micro-pump. 2, the product does not have proof performance, can not be used in explosive environments! 3, when the extraction of harmful gases, the customer must re-seal the pump to ensure safe! 4, must ensure that pipelines, gas tank and all components of adequate strength to ensure personal safety! Details, see: wωw. RuIyi. ΝeТ Contact: O28-6I986875 / 6I986879 mail: I3324I6455@qQ.Сom Luotf-2013-09